Picture may
vary
Greddy Profec boost controller; Optional Speed Harness for Profec / SCC Switch Adapter
Profec Boost Controllers
The
ultimate in electronics boost control is incorporated in Greddy's
multi-tasker. the PRofec e-01. Designed as a combination
boost-controller data display/logger and original e-manage programmer.
The e-O1 can provide superior boost response, increased boost,warning
meter functions, 3 channel data-logging and access to programming
features provided with the e-manage support tool. Even when used as a
boost controller only, the E-01 has features to smooth out the boost
curve. With both an auto and manual setting for both external and
actuator style wastegates, the PROfec e-01 can alter its compact, high
capacity solenoid valve via various RPM ranges. The large LCD screen
with green electro-luminescent back-lighting is easy to see. Other
standard features include two preset boost levels, a timed over-take
boost and compatibility with Greddy's Remote Switching Systems. The
data display can view 3 different data channels simultaneously such as
boost, RPM or any other channel as boost, RPM or any other channel
inputted by the e-manage. The data can be logged up to 3 hours on an SD
card while also giving warning set points and peak and hold values.
There is also a non-PRofec e-01 version that is only used for e-manage
programming and datalogging. ( Some features require optional harness
to be accessed.)
The
Profec B- Spec 2 integrates all the basic of an electronic boost
controller, with additional useful options. Use the built-in boost
gauge (psi or kPa) to tune in a lo. & Hi. SET % to raise the
boost pressure, then optimize consistency and response with GAIN % and
adjust the START GAIN to set initial wastegate response. Also Built-in
are optional; Warning point, Warning limiter, and peak & last
boost record. Compatible with internal and external wastegates and
Greddy's RSS or SCC's optional speed trigger.
As
easy to use as a manual boost controller, but with advanced electronic
boost controller response, the PRofec Type-S keeps things simple. Two
rotary switches select two independent boost setting (lo. and a Hi),
while third, GAIN switch adjust wastegate's valve response. Matched
with a large capacity inline control solenoid, the Type-S works with
both internal and external set-ups. It is also still compatible with
Greddy's RSS or SCC.
