Free Shipping U.S
Picture may
vary
Greddy Profec Replacement Solenoid Valve fits Profec E-01, B Spec II, Type S Replacement Solenoid Valve
Profec Boost Controllers :
- Necessary sufficient function was collected to the compact
- You use liquid crystal display, displaying boost pressure in real time.
- You adopt the solenoid valve of small-sized bulk, correspond to boost 300kPa.
- 2CH of HI/LO be able to configure boost configuration, it can
change at switches 1. In addition also it is possible to turn to OFF
(lowest boost).
- HI/LO respectively set value gain value. Warning value limiter value configuration possibility.
- Loading peak hold function.
- The
remote switching system, or the switching harness of selling separately
is connected,It can do the boost change of hi.
The
ultimate in electronics boost control is incorporated in Greddy's
multi-tasker. the PRofec e-01. Designed as a combination
boost-controller data display/logger and original e-manage programmer.
The e-O1 can provide superior boost response, increased boost,warning
meter functions, 3 channel data-logging and access to programming
features provided with the e-manage support tool. Even when used as a
boost controller only, the E-01 has features to smooth out the boost
curve. With both an auto and manual setting for both external and
actuator style wastegates, the PROfec e-01 can alter its compact, high
capacity solenoid valve via various RPM ranges. The large LCD screen
with green electro-luminescent back-lighting is easy to see. Other
standard features include two preset boost levels, a timed over-take
boost and compatibility with Greddy's Remote Switching Systems. The
data display can view 3 different data channels simultaneously such as
boost, RPM or any other channel as boost, RPM or any other channel
inputted by the e-manage. The data can be logged up to 3 hours on an SD
card while also giving warning set points and peak and hold values.
There is also a non-PRofec e-01 version that is only used for e-manage
programming and datalogging. ( Some features require optional harness
to be accessed.)
The
Profec B- Spec 2 integrates all the basic of an electronic boost
controller, with additional useful options. Use the built-in boost
gauge (psi or kPa) to tune in a lo. & Hi. SET % to raise the
boost pressure, then optimize consistency and response with GAIN % and
adjust the START GAIN to set initial wastegate response. Also Built-in
are optional; Warning point, Warning limiter, and peak & last
boost record. Compatible with internal and external wastegates and
Greddy's RSS or SCC's optional speed trigger.
As
easy to use as a manual boost controller, but with advanced electronic
boost controller response, the PRofec Type-S keeps things simple. Two
rotary switches select two independent boost setting (lo. and a Hi),
while third, GAIN switch adjust wastegate's valve response. Matched
with a large capacity inline control solenoid, the Type-S works with
both internal and external set-ups. It is also still compatible with
Greddy's RSS or SCC.
