Free Shipping U.S
Picture may vary
Greddy Profec B Spec II Black Electronic Boost Controller Black
Profec Boost Controllers
- Necessary sufficient function was collected to the compact
- You use liquid crystal display, displaying boost pressure in real time.
- You adopt the solenoid valve of small-sized bulk, correspond to boost 300kPa.
- 2CH of HI/LO be able to configure boost configuration, it can
change at switches 1. In addition also it is possible to turn to OFF
(lowest boost).
- HI/LO respectively set value gain value. Warning value limiter value configuration possibility.
- Loading peak hold function.
- The remote switching system, or the switching harness of selling separately is connected,It can do the boost change of hi.
The ultimate in electronics boost control is incorporated in Greddy's multi-tasker. the PRofec e-01. Designed as a combination boost-controller data display/logger and original e-manage programmer. The e-O1 can provide superior boost response, increased boost,warning meter functions, 3 channel data-logging and access to programming features provided with the e-manage support tool. Even when used as a boost controller only, the E-01 has features to smooth out the boost curve. With both an auto and manual setting for both external and actuator style wastegates, the PROfec e-01 can alter its compact, high capacity solenoid valve via various RPM ranges. The large LCD screen with green electro-luminescent back-lighting is easy to see. Other standard features include two preset boost levels, a timed over-take boost and compatibility with Greddy's Remote Switching Systems. The data display can view 3 different data channels simultaneously such as boost, RPM or any other channel as boost, RPM or any other channel inputted by the e-manage. The data can be logged up to 3 hours on an SD card while also giving warning set points and peak and hold values. There is also a non-PRofec e-01 version that is only used for e-manage programming and datalogging. ( Some features require optional harness to be accessed.)
The Profec B- Spec 2 integrates all the basic of an electronic boost controller, with additional useful options. Use the built-in boost gauge (psi or kPa) to tune in a lo. & Hi. SET % to raise the boost pressure, then optimize consistency and response with GAIN % and adjust the START GAIN to set initial wastegate response. Also Built-in are optional; Warning point, Warning limiter, and peak & last boost record. Compatible with internal and external wastegates and Greddy's RSS or SCC's optional speed trigger.
As easy to use as a manual boost controller, but with advanced electronic boost controller response, the PRofec Type-S keeps things simple. Two rotary switches select two independent boost setting (lo. and a Hi), while third, GAIN switch adjust wastegate's valve response. Matched with a large capacity inline control solenoid, the Type-S works with both internal and external set-ups. It is also still compatible with Greddy's RSS or SCC.
